We took of the front struts tonight and it all went pretty well. The nuts were on unbeleivably tight probably from being screwed on too tight after the springs were cut.
The struts will be replaced tomorrow with some fresh struts at stock height. The springs could be taken off the struts with no pressure at all. It would of seriosuly been near impossible to drive or handle this car! There was no tention from the springs! I say the struts would probably be no good as they have had to adjust to the extreme drop in height.
The nuts in the middle here were the ones that were near impossible to get off even after alot of WD40 and attemps. Finally a huge torque wrench did the trick!
Struts to go in compared to struts with cut springs
Making good progress!
0 comments:
Post a Comment